SEARCH OUR RESOURCE CENTER
The XLS-1 Ultrasonic Level Sensor is Gems' rugged alternative to reed switch level sensors. They are compatible with water, water-based and hydrocarbon-based liquids, and are perfect for applications where foam and condensation may affect other sensing
technologies. The XLS-1 is an ideal solution for sensing liquid level in generators, water tanks, radiators, printers, and other harsh industrial applications.
It is an ultrasonic point level sensor for applications such as generators, water tanks, radiators, printers, and other industrial applications. It is compatible with water-based and hydrocarbon based liquids, and perfect for applications where condensation may affect other sensing technologies. The gap area detects the presence or absence of the liquid medium and actuates a solid state switched output.
What is the media viscosity?This is currently being tested, but the maximum viscosity of the media is approximately 200 cSt. (927 SSU at 100F).
What is the longest probe I can get?At this time, the probe length is fixed. For qualified OEM volume contact factory.
Can I have another integral connector?For qualified OEM volume contact factory.
Does Gems offer a mating connector?Yes, we can offer a mate to the DT04-P3 connector. It can be used on the XLS-1 and also CAP-300 model type. Example Gems part number 248404, TPU Cable, 1 meter long. Longer leads are available on request. A minimum purchase is required.
What is the signal output logic for the XLS-1?Open collector, Sinking NPN or Sourcing PNP output, 5-28 VDC, 30mA max.
What electrical terminations are commonly offered for the XLS-1?Integral 3 pin Deutsch (DT04-3P), 18 AWG type SXL flying leads 12-14" Standard or 18 AWG PVC cable 12-14" Standard. Alternative wire and cable lengths available upon request.
Does the XLS-1 have circuit protection?Reverse voltage: up to 28VDC for 30 minutes. Over voltage: up to 40VDC for 30 minutes.
Will the XLS-1 require maintenance?Nearly zero maintenance required.
Will the XLS-1 work for an oil application?Yes, except in high viscosity oils. This is currently being tested, but the maximum viscosity of the media is approximately 200 cSt. (927 SSU at 100F).
What is the best orientation and mounting for the XLS-1?The mounting orientation is horizontal +/- 60 degrees.
What is the delay time for the XLS-1?Standard units come with no delay. For qualified OEM volumes contact factory.
What is the response time for the XLS-1?The response time is less than 0.2 seconds.
Should I be concerned with moisture ingress with the XLS-1?It is a sealed design which prevents fluid intrusion and passes IP67 and IP6K9K (sensor only) standards.
Will the XLS-1 detect foam or condensation?No, the sensor is designed to ignore the foam and condensation.
CAP-300 Series Capacitive Level Sensor is compact, low-maintenance and highly-durable sensor that tolerates coating, can be mounted in any position and is compatible with coolants making it the ideal OEM solution for power generation equipment,...
ELS-1150 Series Single-Point Level Switch is a high-performance sensor that features a micro-processor board design to provide a wide range of capabilities including sinking, sourcing and time delay outputs. The strong fused glass prism eliminates...
