Fittings and Probes

Series 3B Warrick Electrode Fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. These electrode fittings incorporate a 1/4-20 female thread that must be combined with a Series 3R rigid...

Series 3C Warrick Electrode Fittings are side chamber fittings that are cast iron or brass, pressure-tight chambers containing up to 4 probes from 1-1/2 inch (38 mm) to 6 inches (152 mm) in length. Pipe tappings provide connection to the side of...

Series 3E Warrick Electrode Fittings are cast metal, pressure-tight assemblies capable of holding 1-7 probes. Fittings are attached to vessels via male NPT mounting. Series 3E Fittings require the use of 3R rigid or 3W wire suspended electrodes.1...

Series 3F Warrick Electrode Fittings are flanged, pressure-tight fittings can handle up to 7 probes and are designed for general purpose service. They mate with standard pipe flanges coupled to the top of the vessel and are available in a variety...

Series 3G Warrick Electrode Fittings are designed for general purpose use and are made of PVC to withstand corrosive conditions. The flanged assemblies are sized to accommodate up to 7 probes and to mate with standard flanges on the tops of...

Series 3H Warrick Electrode Fittings feature a one-piece electrode core which can be trimmed to length in the field. One-piece construction simplifies installation. Series 3H fittings are available with three different mounting threads and are...

Series 3J Warrick Electrode Fittings have a 1" NPT body and housing and are designed for applications where multiple probes are required in a small, non-pressure location. (For single probe applications, Gemsâ„¢ recommends using a...

Series 3K Warrick Electrode Fittings contain up to 4 probes and accommodate probes from 1-3/4" (44 mm) to 13" (330 mm) in length. Additional tappings are available for tricocks and gauges.1 to 4 ProbesCast Iron HousingExternal Side Mounting

Series 3L Warrick Electrode Fittings have a 1/8" NPT bushing and are rated for up to 150 psi (10 bar). Series 3L is U.L. recognized. Single ProbeBrass or Cast Iron Housing1/8" NPT

Series 3M Warrick Electrode Fittings are designed for use in food, beverage and pharmaceutical applications where cleanliness is vital, Series 3M fitting assemblies are made of FDA-approved materials and accommodate up to four (4) 316SS probes....

Series 3MT Warrick Electrode Fittings are designed for use in food, beverage and pharmaceutical applications where cleanliness is vital. Assemblies are made of FDA-approved materials and accommodate up to four (4) Teflon®-covered probes with...

Series 3N Warrick Electrode Fittings hold 1 to 3 probes and are designed to operate at atmospheric pressure. The assembly mounts on a flat surface atop open tanks or closed vessels. Series 3N fittings require the use of 3R rigid or 3W wire...

Series 3S Warrick Electrode Fittings are designed to provide isolation of electrodes from liquids containing solids, grease, soaps, sludge, rags, paper and other debris commonly found in wastewater and sewage pumping applications.1 to 7 ProbesCast...

Series 3R-3T Warrick Probes are metallic rods with threaded ends that screw into a fitting that extends vertically down into the liquid. Available in a variety of materials for different applications including general purpose use. 3T tapered rods...

Series 3W Warrick Probes are designed to be suspended above liquid with PVC-insulated wires and consist of metallic bars within a protective plastic shield. 3Z1A wire and 3Z1B adaptor kit required for use with 3E, 3F and 3N fittings.Field...

Series 3Y Warrick Probes consist of metallic bars within a protective plastic shield, designed to be suspended in liquid. Series 3Y suspension wires are PVC or Teflon® insulated for use in corrosive liquid applications. 7/8" (22 mm) diameter x...